home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
GRAPTIES
/
VERSMAP1.LZH
/
VMAPREAD.ME
< prev
next >
Wrap
Text File
|
1992-09-01
|
2KB
|
41 lines
1. To run VERSAMAP, place the disk containing VMAP.EXE and VMAP.MAP
in your disk drive; change to that drive; type VMAP at the DOS
prompt; then press Enter.
To plot the default map, the file VMAP.MAP must be in the same
directory as the map program, VMAP.EXE.
To annotate the map with text, the font files (file extension
.FON) must be in the same directory as the mapping program,
VMAP.EXE.
2. Pull down menus are accessed with the Alt key. Press Alt and then
the highlighted letter to access a menu. Use the up and down
cursor keys; then press Enter to select a menu item.
3. To exit VERSAMAP press Esc, then Alt, then the letter P, then the
letter X.
4. To print the manual, set the printer to the extreme top of a new
page of paper (at the perforation for tractor feed paper); turn on
the printer; type the following command at the DOS prompt,
TYPE VMAP.DOC > PRN
and press Enter. The manual is 43 pages long.
5. If you are printing the manual from a word processor, set it for
top margin 0, left margin 0, 66 lines of text, and a page length
of 66 lines.
6. You must install the Hercules driver, MSHERC.COM, to use Hercules
mono graphics with VERSAMAP. To install the driver, place the
disk containing MSHERC.COM in your drive, type the following
command at the DOS prompt,
MSHERC /H
and press Enter.